BECKHOFF CU8880-0000 - Manual (Page 14)

Appendix
12 CU8880-0000
Technical data
Number of ports 1 USB-input type B
1 Ethernet interface with 10/100BASE-T-connector RJ45
Supported USB standard USB 2.0
Status display 5 LEDs
USB wiring length maximum 1 meter
Power supply power supply via USB input connector
Max. current input from 5 V
USB maximum 500 mA at 5V DC
The following conditions must be observed during operation:
Environmental conditions Ambient temperature: 0 to 55°C (operation)
-25°C to +70°C (transport/ storage)
Atmospheric humidity: Maximum 95%, non-condensing
Vibration/ Shock resistance EN 60068-2-6 / EN 60068-2-27, EN 60068-2-29
EMC resistance burst/ ESD EN 60000-6-2 / EN 60000-6-4
Protection class IP20
Do not use the CU8880 in
areas of explosive hazard The Ethernet Controller may not be used in areas of explosive hazard.
Dimensions (W x H x D) app. 35 mm x 98,5 mm x 76,6 mm (with mounting for DIN rail)
Weight app. 95 g
Assembly on 35 mm mounting rail conforms to EN 50022
Installation position any
Approvals CE
Approvals for USA and Canada
FCC: Federal Communications Commission
Radio Frequency Interference Statement
FCC Approval for USA This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
FCC: Canadian Notice
FCC Approval for Canada This equipment does not exceed the Class A limits for radiated emissions as
described in the Radio Interference Regulations of the Canadian Department of
Communications.