BECKHOFF CP770x-140x - Manual (Page 14)

Product Description
2.4.3 Power Supply CP770x-1401 (XS01)
In the front of the Panel PC CP770x-1401, an emergency stop button (S1) and three electromechanical
push-buttons (S2 - S4) are integrated. The buttons can be connected user-specific.
emergency stop
button (S1)
push-
button S2 push-
button S3 push-
button S4
The power supply connection of the Panel PC and the connection of the emergency stop button and the
electromechanical push-buttons are established via the 19-pole M20 (XS01) connector in the connection
area. The protection class of the circular plug-in connector accords to the IP67-standard. For the accurate
connection see chapter
Wiring Diagram.
XS01
Circular plug-in connector 19-pole M20 built-in linear, IP67, Intercontec
(Intercontec A EG A 378 MR93 00 0032 000)
Take notice of the ampacity
Warning
The maximum ampacity of the pin for connecting the emergency stop button and the
electromechanical push-buttons is 100 mA at max. 35 V AC/ DC.
Male connector is provided
Note
The male connector Intercontec A ST A 278 FR91 61 0035 000 is provided with the
Panel PC
Pin Signal Pin Signal
1 S1.12 11 LED red K1
2 S1.11 12 PE
3 S1.22 13 S4.14
4 S1.21 14 S4.22
5 S2.14 15 LED white K1
6 GND 16 NC
7 S2.22 17 NC
8 LED green K1 18 NC
9 S3.14 19 + 24V
10 S3.22
12 CP770x-140x