Hyundai H-CMD7083 - Manual (Page 18)

18
PTY (Program Type)
1. Press PTY/CLK button on the panel to activate the PTY function. The previous PTY type is shown.
2. Press
PTY/CLK once again to enter the MUSIC type or press twice to enter the SPEECH type, then use buttons 1 - 6 to select the
desired program type (see the following table).
3. When PTY is selected, the radio starts to search corresponding PTY information, and stops if the corresponding PTY
information is detected.
4. If there are no keys entered for 2 seconds, previously selected PTY is searched. During 1 loop, if desired PTY is not found, NO
PTY is flashed, then return to previous normal radio and PTY word disappears.
5. Press PTY button for the 3 rd time to switch the PTY function off.
Press SEL button for 2 seconds to enter the menu mode. Press it repeatedly to choose the needed item: TA SEEK/ALARM =>
RETUNE L/S => MASK DPI/ALL.
TA (Traffic Announcement) mode
To determine what action will the radio take if the newly tuned station does not receive TP (Transport Program) information for 5
seconds. Rotate the VOL knob to select the desired mode: TA ALARM and TA SEEK.
- TA SEEK
When newly tuned station does not receive TP information for 5 seconds, the radio retunes to next station which has not the same
station (PI – Program Information) as the last station, but has the TP information. When TP information gets lost at the current
station for retune time which is set by RETUNE SHORT (30 seconds) or RETUNE LONG (90 seconds), the radio starts to retune