BDI 4323 Linear - Manual

C - Picture Hanger
and
Nails
x 2
B - Frame Assembly
*Pre-installed
Rubber Pads x 4
D-Rings x 2
Velcro Strip x 1
HIGH PERFORMANCE
FURNITURE FOR YOUR
H O M E
www.bdiusa.com
[email protected]
Placement and Maintenance
Linear™ Mirror is designed for indoor use. Clean mirror with glass cleaner, and
wood veneer and chrome with a moist cloth.
The assembly workspace should be a non-marring surface such as carpet. For
missing hardware, please contact BDI Customer Service at:
[email protected] For all other concerns please contact your local BDI
Retailer.
2/2008
Linear
TM
Mirror
4323 & 4324
Hanging Instructions
Your Linear™ Mirror is designed and engineered for easy
assembly.
Carefully follow this procedure to prevent damage.
Designed by Al Glass.
‘Linear’ is a trademark of Becker Designed, Inc.
All rights reserved. ©2008 Becker Designed, Inc.
A-1
B-1
68”
10”
floor
Step 2 - Install Mirror to Frame Assembly:
Grasping Mirror carefully with two hands, center mirror over
Frame Assembly, ensuring that Mirror’s cleat (A-1) engages
and hangs on upper horizontal bracket of Frame Assembly
(B-1). Apply gentle pressure at lower portion of Mirror
against Frame Assembly to engage Velcro attachment.
Component List
Step 1 - Hanging the Frame Assembly at BDI’s suggested
height:
At 68” from the floor make two marks with a pencil,
10” apart. Make sure your marks are level then
install supplied Picture Hangers (C). Verify that Picture
Hangers are level and hang Frame Assembly (B) from
D-Rings. (See illustration to left)
68”
10”
floor
A - Mirror x 1
68”
10”
floor