Dixon 17823-106 - Manual (Page 35)

OPERATION INSTRUCTIONS
35
GRASS HEIGHT & CUTTING SUGGESTIONS:
Do not attempt to cut grass when it is wet.
If the grass is tall, place the mower deck cut height
lever in the top or second notch. “Initially” overlap
cutting swaths instead of a full swath with each pass.
Some applications may require a second cutting.
Keep the underside of the mower deck clean.
Maintain sharp blades throughout the cutting season.
As a rule of thumb, never cut off more than 1/3 of the
total grass blade length. Correct mowing height can
reduce weeds and disease by 50% to 80%.
The following grass cut heights are based on adequate
moisture conditions and normal thatch build-up in a
healthy lawn. Some locations and applications may
require slightly different cut heights. If in doubt, consult
your local lawn professional for assistance.
Grass Types Best Cut Heights
Bermudagrass 1 - 2”
Bluegrass 2 - 3”
Buffalograss 1 1/2 -3”
Ryegrass 2 - 3”
Tall Fescue 3-3 1/2 ”
Zoysiagrass 1 - 3”