Baumatic BFWM1407W.1 - Manual (Page 18)

18
Manual soaking
1) Load the laundry into the washing machine drum and put the
detergent into the drawer according to the manufacturer’s
instructions.
2) Use the program selection dial (1) to select the required wash
cycle. Press the start / pause button (2) to begin the cycle.
3) After approximately 10 minutes have passed, press the start /
pause button (2) again to pause the cycle. The clothes are then
able to soak in the water for your chosen length of time. Press
the start / pause button (2) to continue the wash cycle.
Additional wash cycle options
o
After you have selected your main wash cycle using the selection
dial (1) you can proceed to select additional wash cycle options by
pressing the options button (6).
o
After pressing the option button (6) you can use the selection
buttons (9) to highlight your desired optional extras.
o
Press the option button again when the desired extra wash cycle is
illuminated to set that wash program. This process can be repeated
to select multiple optional wash cycle extras.
o
Once the desired wash program and any additional wash cycle
options have been selected, press the start / pause button (2) to
begin the wash cycle.
Easy-Iron function
o
The Easy-Iron function means that the machine will not execute
the last drain of the wash cycle – until the start/pause button is
pressed.
o
This means that the laundry will sit in the water until you are
ready to remove it for drying, preventing it from developing
creases.
o
This must be selected before starting the wash cycle.
NOTE: The maximum running time of this function is 10 hours.
After this time the machine will drain and spin automatically.