Baumatic BMC455TS - Manual (Page 40)

40
o
Do not position the microwave oven near a heat source. Please
note that transmitting and receiving equipment such as radios
and televisions can affect the operation of the microwave oven.
Fixing the appliance into the housing unit
IMPORTANT: NO OTHER METHODS OF INSTALLING THE
MICROWAVE ARE SANCTIONED BY BAUMATIC.
o
Fully insert the appliance into the aperture hole and centre it.
o
Ensure that none of the cables are kinked or compressed when
the appliance is in position.
o
Screw the appliance to the aperture using the fixing screws and
bushings provided.
o
The gap between the housing unit and the appliance must not be
closed by additional plinths.
o
WARNING: The microwave will get hot during operation;
care should be taken not to accidentally come into contact
with the outer surface.
o
WARNING: Children should not be allowed near to the
appliance unsupervised.
Troubleshooting
o
The microwave will not switch on.
*
Check that the appliance has been connected to the mains
supply correctly.
*
Check that the fuse in the moulded plug has not blown.
*
Check that the fuses in your fuse box have not blown.
*
If fuses blow on a regular basis, then we would recommend that
you consult with a qualified electrician.
*
Check that there has not been a power cut.
o
The microwave will not start cooking.
*
Check that the door is properly shut.
*
Check that the door seal and surrounding area are clean.
*
Check that you have pressed the start button.