Baumatic BHI300 - Manual (Page 30)

30
cookware (layer of
different metals vibrating
differently).
indicate a fault.
The induction hob makes a
low humming noise when
used on a high heat setting.
This is caused by the
technology of induction
cooking.
This is normal, but the
noise should quieten
down or disappear
completely when you
decrease the power
level.
Fan noise coming from the
induction hob. A cooling fan built into
your induction hob has
come on to prevent the
electronics from
overheating. It may
continue to run even after
you’ve turned the
induction hob off.
This is normal and needs
no action. Do not switch
the power to the
induction hob off at the
wall while the fan is
running.
Pans do not become hot and
appears in the display.
The induction hob cannot
detect the pan because it
is not suitable for
induction cooking.
The induction hob cannot
detect the pan because it
is too small for the
cooking zone or not
properly centred on it.
Use cookware suitable
for induction cooking.
See the section on
cookware in this manual.
Centre the pan and
make sure that its base
matches the size of the
cooking zone.
The induction hob or a
cooking zone has turned
itself off unexpectedly, a
tone sounds and an error
code is displayed (typically
alternating with one or two
digits in the cooking timer
display).
Technical fault. Note down the error
letters and numbers,
switch the power to the
induction hob off at the
wall and contact the
Customer Care
Department.