Baumatic BR105 - Manual (Page 23)

23
itting the furniture door to the appliance
you need the appliance door to open from the other
Tools required:-
o
Tape measure
ed screwdriver
IMPORTANT: We recommend that two people install this appliance.
) Undo the screws from the two adjusting bolts that are located on
) Measure the width of the furniture door, at the halfway point mark a
F
If
side, then please reverse the door before commencing the
installation process. (See “Reversing the door section”).
o
Sharp pencil
o
Small flat blad
o
Spanner
a
the top of the appliance door and then remove the mounting bracket
(1).
b
line vertically down the inner surface of the furniture door. You should
draw the line from the top of the furniture door to approximately
halfway down.