Baumatic BCG520SL User Manual
Page 22
22
h
will light only with a small flame. To
clean the nozzle use a brush soaked in solvent.
y burners carrying
out the disassembly steps in reverse order.
Replacing the oven bulb
attempt to either
emove or replace the oven bulb.
shelves
and the drip tray.
Unscrew the lamp cover.
remove it from its holder.
Replace the bulb with a 15 W/300°C, screw type pygmy.
Do not use any other type of bulb.
o
Screw the lamp cover back into its original position.
o
The body near the nozzle should always be clean. Dirt
accumulating around the nozzle may clog it, as a result of whic
the burner will not light or
o
Dry all the elements of the burner carefully as wet elements may
not light properly. Assemble the clean and dr
IMPORTANT: The oven must be disconnected from
your mains supply before you
r
o
Remove all oven
o
o
Unscrew the bulb and
o
o