Drive Medical Design Cirrus Plus Power Wheelchair - Manual (Page 4)

3
UNPACKING & ASSEMBLY
UNPACKING
After removing your Cirrus Plus Wheelchair from the carton please check that you
have been supplied with the following main parts as standard specification.
1. The main frame with Motors /gearboxes and front castors attached
2. Front rigging with swing away footrests (Fig. 1)
3. Rear drive wheels (Fig. 2)
4. Anti-tip wheel (Fig. 3)
5. 2 Batteries (Rechargeable sealed lead-acid battery) U1 35 Amp (Seperate Boxes)
6. Battery Tray (Fig. 4)
7. Battery Charger 4 amps
8. Controller P.G. VSI SO (Fig. 15)
9. Motors: 24VDC (Fig. 2)
ASSEMBLY
Assemble the main parts mentioned as per the following procedure and check the
assembly for normal operation.
1. Mount the swing away footrests.
2. Drive wheels, motor / gearbox assemblies / Anti-tip wheels are pre-installed.
Fig. 1
Fig. 2 Fig. 3