Balanced Audio VK-6200 - Manual (Page 8)

Servicing
The Balanced Audio Technology VK-6200 does not require periodic service to maintain its
high performance. In case of malfunction, (when replacing fuses fails to eliminate the
problem) please direct any further service inquiries to the factory.
Cleaning
To remove dust, occasionally wipe the front and top surfaces of your VK-6200 with a damp
soft cloth. If fingerprints appear, you may use a mild, non-alkaline soap solution. Do not use
abrasive cleaners, as they may damage the fine finish of the unit.
Specifications:
Number of Channels
From 2 to 6
Output Power into 8 Ohm
200Wpc
Output Power into 4 Ohm
400Wpc
THD at Rated Power
Less than .2%
Gain:
23dB in balanced mode
29dB in single-ended mode
Input Impedance
47k
Ω
each phase
Dimensions:
19” x 10.5” x 23”
Weight
100lb for two-channel chassis
20lb each additional channel