Baja Motorsports SC50P - Manual (Page 28)

25
To adjust the idle speed properly, you need a tachometer. If you do not
have one, ask your authorized service center to perform this adjustment.
To adjust the idle speed:
1. Start the engine and warm it up.
2. Turn the engine idle screw in or out so that the engine idle speed is at
1450~1550 r/min.
WARNING
Improper adjustment of the idle speed could be hazardous.
An idle speed that is too high could cause the scooter to launch
forward when you start the engine. This may cause an accident.
Excessive engine wear may also result if idle speed is adjusted
improperly or when the engine is not fully warmed up. Adjust the
idle to the correct speed. Make sure the engine is fully warm before
adjusting the engine idle speed.
Inspect the fuel hose for damage
and fuel leakage. If any defects
are found, the fuel hose must be
replaced.
Engine Idle
adjustment
Screw
Fuel Hose
Idle speed adjustment