BAFO BF-321 - Manual (Page 10)

BF-321 USB2.0 to Ethernet Adapter User’s Manual 10
6.5.8 You can go to “System Preferences”- “Network” . You will see New Port
Detected.
2 2 2 2 3 3 3 3
7.1 Q : Windows® Will not be able detect an USB Device.
A: Make sure USB plug be inserted into “BF-321 USB2.0 to Ethernet Adapter’s”
USB connector properly.
7.2 Q: What is the meaning of four indicators ?
A: i). Red Color indicator: When collision happen, it will turn on.
ii). Green Color indicator: When data transmit is full duplex, it will turn on.
iii). Yellow Color indicator: When this “USB2.0 to Ethernet Adapter” link with
network, it will turn on.
iv). Dual Color indicator: When this “USB2.0 to Ethernet Adapter” operate at
100Mbps then it will light at Orange color. On the contrary, when it
operate at 10Mbps then it will light at Green color.
7.3 Q: The network which I have connected is 100Mbps, but the LED show it
operate at 10Mbps ?
A: Please check two issues.
i). Make USB Port of PC is USB2.0 spec.
i). If USB port provided by USB2.0 PCI Card then please make sure this
card really installed at USB2.0.