BAFO BF-2000 - Manual (Page 27)

USB-IDE 2.5”HDD Enclosure User’s Manual 26
6.13 MAC Driver installation
Before you start to installing the driver. Please DO NOT connects your USB
to IDE 2.5” hard disk Enclosure into the USB port to your Apple computer.
Follow the steps below to install MAC driver of the USB-IDE 2.5”HDD Enclosure:
6.13.1 Power on the computers that you want to connect USB-IDE 2.5”HDD
Enclosure and make sure that the USB port is enabled and working
properly.
6.13.2 Insert the USB-IDE 2.5”HDD Enclosure driver CD into the CD-ROM drive
and copy the “D:\Driver\ BF-2000 & BF-2001\MAC\Setup.sit "to desktop.
6.13.3 Run the SETUP.SIT, it will create a SETUP Folder on the desktop.
6.13.4 Open the SETUP Folder and copy the “PL2307AIM” and “PL2307” to the
“System folder”-“Extensions”
6.13.5 Plug in the USB-IDE 2.5”HDD Enclosure and DC power adapter (IF the
hard disk isn’t MAC OS system, it can’t be found, please see the
Troubleshooting item to format the hard disk.)