BAFO BF-2003 - Manual (Page 9)

USB 2.0 to IDE 3.5” hard disk Enclosure User’s Manual 8
7.1.7 Connect the USB port of USB2.0 to IDE 3.5” hard disk enclosure to PC
with USB cable. System will auto detect the device and load the driver
then create a new device and name of “ (E:) ” at desktop as shown below.
7.1.8 After Windows ® installed all the driver, you have to check “My
Computer”-“Control Panel”-“System”-”Device Manager” to make sure
the driver has already installed. Then, in the “Disk Drives” it will show a
“FUJITSU MHM2050AT” (This model number will vary with different
Hard Disk) , in the “Hard disk controllers” it will show a “BAFO Storage
Adapter Bridge Module” , and in the “Universal Serial Bus controller” it
will show a new item of “BAFO USB Storage Adapter ”
.