BAFO BF-7300 - Manual (Page 29)

25
Wireless 11b Access Point AP11B User’s Guide
LAN is short for Local Area Network. This is considered
your internal network. In the LAN Setting page, you can
configure the IP setting.
LAN
DHCP Client - default Disable
When set to [Enable], your access point can obtain an IP
address automatically from the DHCP server.
Please note that once you enable DHCP Client, you might
not be able to configure your AP11B in web browser unless
you know what IP address your access point is assigned.
IP Address - default 192.168.1.254
The IP address of the LAN interface.
Subnet Mask - default 255.255.255.0
The subnet mask of the LAN interface.
Default Gateway - optional
The IP address of the router/gateway on your network.