BAFO BF-7600 - Manual (Page 30)

24
Wireless 11b MiniPCI Card User’s Guide
Status
In the Status tab, you can configure more network settings.
Channel
Specifies the operating radio frequency channel in
Ad-hoc mode, which should be set to the same
channel as the other points in the wireless network.
Speed
This field sets the current transmitting rate. The
speed should be set to Auto rate to optimize
performance and range, which will adjust the
transfer speed for best performance and longest
range automatically.
Radio
Set to On to activate the radio.
SSID
Means Service Set Identifier, a unique name shared
among all points in a wireless network. It must be
identical for all points in the network. Then the card
will be able to connect to an access point with the
same SSID.
Click Advance, and you can get more information about
the LAN traffic status and more detailed settings.
Signal Strength:
shows the received signal
strength level.
Link Quality:
shows the measured signal
level and connection status.
>>> 4.4