Baby Lock Enlighten (BLE3ATW-2) Instruction and Reference Guide - Manual (Page 31)

2
T
H
R
E
A
D
O
V
E
R
L
O
C
K
29
Blind Hemming
A
B
C
D
Your Baby Lock Enlighten can create a sturdy, nearly invisible
blindhem.
1. Set the machine for 2-Thread Overlock-Narrow with the right
needle threaded. Set the stitch width at 5.0 and the stitch
length at 4.0 in the standard range.
2. Fold up the hemline and press it in place. Then fold the hem
allowance back against the fabric right side to create a fold
about 1/4 " from the top edge of the hem as shown (fig. A).
3. Align the fold under the presser foot and stitch, allowing the
needle to catch only a thread or two of the soft fold (fig. B). The
blade will trim the top edge of the hem and the loopers will over-
cast the edge for a clean finish (fig. B).
4. Open the fold and press flat (fig. C).
Note: An optional blindhem foot for consistent guiding is available
through your Baby Lock retailer (fig. D).
Page 7 Optional Accessories listing for part number.