Baby Lock Eclipse DX (BLE1DX-2) Instruction and Reference Guide - Manual (Page 14)

S
E
R
G
E
R
S
E
T
U
P
Right Needle
(fig.B page 13).
2. Place the thread on the second from left spindle on the thread stand (fig.A). Thread needle
thread guides
①
and
②
, through the groove on the face plate and through guides
③
,
④
,
⑤
and
⑥
. Pull a 6 inch length of thread through guide
⑥
.
4. Hold the thread between your left thumb and middle finger (fig.B page 13). With your
right index finger, hold the thread horizontally in front and just below the needle eye.
With the left index finger, push the needle threader lever down to insert the hook into the
needle eye. Slip the thread into the threader hook guides in front of the needle. Carefully
release the needle threader lever and remover your right index finger, allowing the thread
to be pulled through the needle eye.