Baby Lock Endurance (Previous Model) (BND9) Instruction Book Addendum - Manual (Page 12)

10
b
To open another pattern sent from the
computer, touch , and then repeat the
procedure starting from step
8
to continue
embroidering.
• To stop embroidering or to embroider the
same pattern again, touch .
Note
● The embroidering screen settings specified
in step
0
are saved even if was
touched to continue sewing after
embroidering is finished.
Memo
● If the embroidery machine is turned off
while it is embroidering, the resume
operation can be used the next time it is
turned on.
Disabling the Link function
1
Touch , and then touch and
to display page 5 of the machine settings
screen.
2
Touch to disable the Link function.
X When the following message appears,
touch .
3
Turn off the machine.