Baby Lock EmbroideryPro_BMP8_InstructionRef (BMP8) Instruction and Reference Guide - Manual (Page 132)

Selecting an Embroidery Pattern 115
5
Note
● The connectors on the USB cable can only
be inserted into a connector in one
direction. If it is difficult to insert the
connector, do not insert it with force and
check the orientation of the connector.
● For details on the position of the USB port
on the computer (or USB hub), refer to the
instruction manual for the corresponding
equipment.
● Connection through a USB hub may not be
possible, depending on the operating
environment. If a connection is not
possible, connect the cable to the USB port
of the computer.
2
After the “Removable Disk” folder appears in
the “My Computer” folder on the computer,
the connection is completed.
■ Recalling
1
Move/copy the pattern data that you wish to
recall into the “Removable Disk” folder.
X Pattern data in the “Removable Disk” folder
is written to the machine.
Note
● While data is being written, do not
disconnect the USB cable.
● Do not create folders within the
"Removable Disk" folder. Even if folders
have been created, they will not appear in
the machine's screen.
● While the machine is sewing, do not write
data to or delete data from “Removable
Disk”.
2
Touch .
X The list of patterns is displayed.
3
Select an embroidery pattern.
Touch the desired pattern.
• If you decide not to recall the pattern, press
.
X The selected pattern appears in the pattern
display area.
• If the wrong pattern was selected or you
wish to select a different pattern, touch the
desired pattern.