Axel AX4010 Installation Guide User Manual
Page 10
Setting-Up the AX4010
________________________________________________________________
Installation Guide - AX4010 Office Server
7
Notes:
- The set-up session can also be exited by pressing the administrator
switch (in this case, modifications are discarded).
- During set-up mode, the two leds of the Ch4 port remain lit.
3.2 - FROM A TELNET SESSION
To run set-up within a telnet session, the IP address of the AX4010 must
already be set.
Run the telnet session from any network host. Use 4096 as the telnet port.
The set-up main menu will then display on the console.
When the set-up session has been completed, the AX4010 automatically
terminates the telnet session.