4 - connector pin assignments, 1 - ethernet port rj45 (net), Ethernet – Axel AX3000 70W Installation Guide User Manual
Page 18: Port, Rj45, Net)
Connector Pin Assignments
4 - CONNECTOR PIN ASSIGNMENTS
This chapter describes the connector pin assignments for the different ports of
the AX3000 Models 70.
4.1 - ETHERNET PORT RJ45 (NET)
Recommended wiring is a non-shielded twisted-pair cable (UTP), category 3
or 5
1 2 3 4 5 6 7 8
RJ45 connector
(Models 70 rear panel)
Note: the maximum length of a 10/100BaseT cable is 100 meters (330 feet).
Pin
Signal Name
Direction
1
TX+ (Transmitted Data)
Input
2
TX- (Transmitted Data)
Input
3
RX+ (Received Data)
Output
4 ---
---
5 ---
---
6
RX- (Received Data)
Output
7 ---
---
8 ---
---
12
Installation Guide - Models 70