Firmware upgrade – Awind WP-820 User's Manual User Manual
Page 29
29
*** Another way to restore Factory Default Settings, Follow below
procedures.
1. Press [Reset] button and Hold.
2. Turn on wePresent box.
3. Wait for over 10 seconds and relief [Reset] button.
4. It will take effect to restore factory default settings.
Firmware Upgrade
Click [Firmware Upgrade] button to upgrade firmware.
1. Firstly, you have to get latest firmware image file from your vendor.
2. Click
3. Click
4. A warning message shown and count down counter on the screen.
5. After a few minutes, a complete message shown on the screen.
This manual is related to the following products: