Aviosys 8840 Manual - Manual (Page 13)

13
For Example :
Setup “ ON: 00:00:05 “ + “ OFF : 08:00:00 “ + Repeat
Means that it turn ON in 5 seconds ( Aa NO – connect ), and turn off after 8 hours
( As NO – Disconnect ) ,then repeat this action.
Note : Please do nto setup Scheudle & Stop Watch on same port .
Setup
In Setup section , user can change the name of each output , and also assign the
ON/OFF status after 8840 power reboot by enable “Save power status”.
If select “ Save power status” , the outlets status will be the last status as device power off.
If no select “ Save power status” , the outlets status will be the default status as device power
turn ON to ON ( All LED light turn ON as device power ON ) .
Demo
Choose Demo mode , user can setup turn ON by sequence or at the same time .