Aviosys 8840 Installation User Manual

Page 2

Software Installation

Before install 8840, Please make sure that your PC had install .NET . Or

please go to here to download before install USB Power 8840 . :

Please put the CD in your CD ROM and it will execute AUTORUN. file or you

can open by Windows . Please use web browser

“ IE “ to open the CD. Then

go to Manual  USB Series  USB Power 8840 to download the driver

“ USB Net Power Driver ” and the software “USB Power 8840.exe “ into your

hard disk .

3. Connect the 8840 power and the USB port of 8840 power to PC . PC will show

“ Detect New Hardware” , then select the 8840 driver and install . After

install the driver, you can check in devic manager to make sure the driver

install successfully :

Control Panel  System  Device manager  Ports(COM& LPT)  Aviosys Port (COM X)

4.) After confirm the 8840 had shown in Device Manager , please execute the software

“USB Power 8840.exe “ and you will get as following :

Thank you use USB Power 8840. You can refer the details in manual of CD.