Precautions, Temperature, Moisture condensation – Avionics Innovations AICD-III (AM/FM CD Player) Operation Manual User Manual
Page 3: Damaged disc, Irregular shaped discs, Proper handling, Caution for new discs

Avionics Innovations
AICD III Operation Manual
6
Avionics Innovations
AICD III Operation Manual
SELECTION OF RADIO BANDS
PLAYING A COMPACT DISC
(1) Press the (BAND) buttons to select band.
(1) Insert a CD half way into the slot with the label side facing up. The
AM or FM1, FM2, FM3
player automatically draws the disc into the disc compartment. “LOAD” will
be displayed. While disc is loaded, the “DISC” indicator will be displayed.
MANUAL AND SEEK TUNING
(2) Insert a CD. The CD player begins to playback from the first track on the
disc. The display shows the track number and elapsed time of the track
being played. When the last track is played back the player returns to the
first track and begins playback from that point
Press the (UP or DWN) button to move to a higher or lower frequency.
Press and hold the (UP or DWN) for more than 0.5 second, then release to
seek to the next station.
Searching stops automatically on strong wave stations when the “LOCAL” is
on
(3) If and when done listening to the CD, either press the (
∆) button to eject
the CD. Or press the (SOURCE) button to go the radio mode.
Press the (LOCAL) button in the radio mode to turn the “LOCAL” on. Press
the (LOCAL) button again to turn “LOCAL” off.
SELECTING A TRACK
MANUAL STORING OF STATION PRESETS
(1) Press the (DWN) button once during CD play to return to the beginning of
the current track. If you wish to access a track further back, repeatedly
press until you reach the desired track.
(1) Select the radio station and tune in a desired radio station you wish to store
in the preset memory.
(2) Press and hold one of the preset buttons (1 thru 6) until the display blinks
once.
Press the (UP) button once to advance to the beginning of the next track. If
you wish to access a track further ahead, press repeatedly until the desired
track is reached.
(3) Repeat step (2) by pressing (BAND) to set other stations for the FM1 –
FM3 and the AM bands.
SEARCHIING A TRACK
AUTO STATION PRESET
(1) Press and hold the (UP or DWN) button to move backward or forward
until you reach the desired section of the track.
Press and hold (BAND) for more then 2 seconds.
The 6 strongest available stations will be automatically saved in the memory
under preset buttons (1 thru 6)
Press the appropriate preset button for the station you want to hear.
5