Avionics Innovations FPD 12 (Flat Panel Display) - Manual (Page 9)

POST INSTALLATION CHECKOUT
1. Inspect monitor for any physical damage.
2.
Check monitor for proper operation
Note: Panel will not power up until a video signal is applied.
Display Control
The AI-12 FPD is supplied with an infrared remote control. This remote control is a generic
remote operating on a SONY based code). Aim the remote at the AI-12 FPD, The “POWER”
button will turn on the OSD (On Screen Display) menu and cycle through the menu by repeated
pushing of the button. The “CH ▲▼ “ selects fields in the previously selected menu. The “VOL
▲▼” adjusts the selected item. After 5 seconds with no signal from the Remote Control, the
MENU will close and changes will be saved. If the time for the menu (OSD) is not long enough
this time can be extended through your menu selection.
12.0
10.0
7.25
9.75
2.0
12" LCD Monitor
Pwr Lt Up Down Select Menu
Control switches are located on bottm of monitor
Revision NC 10/4/2002
Page 8
Avionics Innovations, Inc
AI-12 FPD Installation Manual