Avionics Innovations DMP-300 (MP3 Player) Installation Manual User Manual
Page 18

DMP-300 INSTALLATION GUIDE
PAGE 18 OF 20
P/N DMP010 V3.2
6.2
Error Messages
In addition, the DMP-300 may display the following error messages:
Display
Meaning
Possible Causes
Invalid Card, no
firmware.
The firmware update file,
“0002.hex”, cannot be opened on
the CompactFlash card.
•
The card was not prepared
using DMP-300 CardPrep
software
•
The card was created for a
DMP100 or DMP200
Invalid Card, no MP3
config.
The MP3 configuration file,
“0002.xd3”, cannot be opened on
the CompactFlash card.
•
The card was not prepared
using DMP-300 CardPrep
software
•
The card was created for a
DMP100 or DMP 200
Internal error number XX
A fault has occurred between the
two internal processors of the
DMP-300.
Contact Avionics Innovations.
Please record the error number
shown on the display.
Memory Card Not
Inserted!
The DMP-300 is not detecting the
presence of a CompactFlash
card.
•
No card is inserted
•
The card is defective
•
The card is not fully seated