SoundMax SM-CCR3030 User Manual

Page 11

Radio operations

Band select
Press the BND/ MODE button on the front panel or BAND LOUD button or RC repeatedly to select your

desired radio band during RADIO mode: FM1, FM2, FM3, AM1, AM2.
Auto/ Manual tuning
- Automatic tuning: Press the << -/ >> + buttons or SEEK buttons on the RC shortly, the automatic
search will start. It will play when finds the station.
- Manual tuning: press << or >> buttons or SEEK buttons on the RC and hold for 2 seconds to enter

manual tuning. MANUAL appears on display. Press the <> buttons or SEEK buttons on the RC
repeatedly to select a station downward or upward step by step.
Programming tuner stations
You can store up to a total of 30 radio stations in the memory (18 FM, 12 MW), manually or automatically.

- To store a station:
-

Select a band (if needed)

Select a station by << -/ >> + buttons or SEEK buttons on the RC.

Hold a Preset button (1-6) which you want store the station for at least 2 seconds.

- To recall a station:
-

Select a band (if needed)

Press a Preset button (1-6) briefly to recall the stored station

AS/PS (Auto Memory Store) function
· Preset scan: press AS/PS button on the RC to scan all preset stations in the memory of the current band

and stay on each memory stations for about 5 seconds. To stop preset scan, press this button again. To listen
to saved station press 1-6 buttons.

· Auto memory store: press AS/PS button on the RC for more than 2 seconds to enter auto store mode.

The radio will automatically store the 6 strongest available stations to the 6 preset memories of the current

band. To stop auto store, press this button again.

Local/Distance Control
In radio mode, press the LOC button on the RC to select local or distance reception.
Local and distance reception setting can facilitate the radio reception, depending on the location in which the

radio is being used.

Scanning the radio station
Press SCAN button on the RC to scanning the radio band.