DXG Technology DXG-505V User Manual

Page 50

Text mode
Original mode

Others

One standard USB 1.1 port

For Microsoft Windows98SE/Me users, please connect the larger USB plug to the PC USB port
and the other end to the digital video camera USB port after installing the drivers and application
software. When the camera enters the “connection to PC” page, press the up button ▲ or down
button ▼ to select webcam and then press the confirm buttom ●. Then follow the below
procedures:
●Step one Right click on “My Computer”.
●Step two Then select “Device manager”.
●Step three Select “GENERIC IDE DISK TYPE47” and then choose “Properties” to show the

below screenshot:

●Step four Please select “DMA” and then press OK.

Note: When playing back video on the PC, make sure the PC has

DirectX8.0 or

newer versions and is supported