ATI Audio PB2X8 - Manual (Page 5)

Audio Technologies Inc. 856-719-9900 [email protected] www. audio.com
SPECIFICATIONS
Output Levels XLR: +4dBm nominal, +22dBm max
TRS: -10dBu (.25V), balanced or unbalanced,
-50dBu via internal jumper plug
Input Levels Microphone: -50dBm nominal from 50 to 600
ohm microphone
Line: -10 to +4dBm nominal
Distortion: 0.1% maximum THD, 20 Hz to 20 KHz
+20dBm level
Response: +0, -.25dB, 30Hz to 20kHz
Noise Mic. Inputs -124dBm EIN
20KHZ Bandwidth Line Inputs: -94dBm EIN
MIC Filters: Two pole active low cut, 150Hz
Phantom MIC Power: +48VDC, rear panel switch
Headphone Output: .2W into 600-ohm stereo TRS phones
Test Oscillator: 750Hz at internal buss levels equivalent to
nominal levels
Connectors: XLR type, 1/4inch TRS, 3.5mm TRS
Size: in. (mm) 17(432) W x 1.75(44.5) H x
10.5(267) D
Shipping Weight:
15lbs (6kg)
Mounting: Suction feet for non-slip desk mounting,
optional Rack Mounting Kit 21181-501
Power: 117/234VAC +/-10%, 47 - 63 Hz, 10VA