ATI Audio HDA100-BAT User Manual
Page 3
ATI Audio Inc.
Tel: 856-719-9900
www.
audio.com
SPECIFICATIONS
OUTPUT 120dB SPL driving typical 32 to 600 ohm headphones;
provides 16V p-p for high impedance headphones and
up to 0.2A p-p to low impedance headphones
INPUT
+4 or -10dBu nominal level (internal jumper plug
selection) for 1mW output; +24dBu maximum input
level, 40Kohm balanced input impedance
DISTORTION
.1% maximum THD, 20Hz to 20kHz, below clipping
RESPONSE
+0/-.25dB 20Hz to 20kHz
NOISE
-94dBm E.I.N., 20kHz measurement bandwidth
CONNECTORS
Input: ¼-inch TRS jacks and XLR connectors
Output: ¼-inch TRS stereo jack
Power: Cylindrical 5.5mm OD, 2.1mm 1D, pin negative
POWER
24VDC nominal at up to .2A from 115VAC external
power supply, WA100-1 (included). Specify
WA100-2-EXCH for operation from 90-264VAC.
Model HDA100-BAT can be powered by two 9V
batteries installed in top cover.
SIZE
1.72” (4.4cm) H X 5.75” (14.6cm) W X 6.0” (15.2cm) D
NET WEIGHT
1.5 lbs. (0.7kg); 3 lbs. (1.4kg) Shipping Weight
POWER SUPPLIES
WA100-1
Wall mount power supply (UL, CSA), 24VDC @ .4
Amp, 115 VAC/60 Hz supplied as standard
WA100-2-EXCH
Universal wall mount power supply with
interchangeable AC mains connectors, 24VDC @ .4
amp, 90-264VAC, 47-63 Hz (optional exchange for
WA100-1
WARRANTY
Limited, One Year Warranty