ATI Audio HDA100 - Manual (Page 3)

Audio Technologies Inc. | 154 Cooper Road #902 | West Berlin, NJ 08091 | Voice 856-719-9900 | Fax 856-719-9903 | www. audio.com
SPECIFICATIONS
OUTPUT 120dB SPL driving typical 32 to 600 ohm headphones;
HDA100 provides 16V p to p for high impedance
headphones and up to. 2A p-p to low impedance
headphones.
INPUT +4 or -10dBu nominal level (internal jumper plug
selection) for 1mW output. +24dBu maximum input
level, 40Kohm balanced input impedance.
DISTORTION .1% maximum THD, 20Hz to 20kHz, below clipping.
RESPONSE +0/-.25dB 20Hz to 20kHz
NOISE -94dBm E.I.N., 20kHz measurement BW.
CONNECTORS Input: ¼-inch TRS jacks and XLR connectors.
Output: ¼-inch TRS stereo jack.
Power: Cylindrical 5.5mm OD, 2.1mm 1D, pin negative.
POWER 24VDC nominal at up to .2A from external power
supply, WA100-1, -2 or -2E.
SIZE in (cm) 1.72(4.45) H X 5.75(14.6) W X 6.0(15.21) D; 1.5 lbs.,
.7Kg net
POWER SUPPLIES
WA 100-1 Wall mount power supply (UL, CSA), 24VDC @ .4
Amp, 115 VAC/60 Hz.
WA100-2 Table top power supply with IEC 320 AC connector,
24VDC @ .4 amp, 230VAC/50 Hz.
WARRANTY Limited, One Year Warranty