ATI Audio DP100 - Manual (Page 7)

Audio Technologies Inc. | 154 Cooper Road #902 | West Berlin, NJ 08091 | Voice 856-719-9900 | Fax 856-719-9903 | www. audio.com
CROSSTALK 70 db minimum at 10kHz in
all modes 70 db minimum at 10kHz in
all modes
INPUT HUM REJECTION 60db minimum, internal
trimmer
N.A.
INPUT IMPEDANCE Balanced, 20kohm bridging
Split and RF Bypassed Unbalanced, 10,000 ohms
Split and RF Bypassed
OUTPUT IMPEDANCE Unbalanced, 1500ohms max
Zs. Outputs may be
paralleled for mono. Transformer Balanced, 40
ohms maximum source
impedance. 600/150 ohms
load impedance.
SLEW RATE 13V/uSec 13V/uSec
RISE TIME 2 uSec. 2 uSec.
OVERSHOOT None 2% maximum
PHASE SHIFT
20 TO 20,000Hz Less than 1 degree input to
output and between
channels. 10 degrees max. input to
output. Less than 2 degrees
between channels.
POWER 115/230 VAC +/-10%, 47 to
63 Hz, 6VA. 115/230 VAC +/-10%, 47 to
63 Hz, 6VA.
DIMENSIONS 1.5”H (3.8cm) x 8.5”W
(21.6 cm) x 4.65”D
(11.8cm), 3 lbs. net, 5 lbs.
Shipping wgt. 1.5”H (3.8cm) x 8.5”W
(21.6 cm) x 4.65”D
(11.8cm), 3 lbs. net, 5 lbs.
Shipping wgt.
ENCLOSURE Steel wrap-around with
reverse printed graphics
overlay Steel wrap-around with
reverse printed graphics
overlay
MOUNTING Accessory Rack Panel P/N 20273-501 mounts 1 or 2 units
in 1 ¾ x 19-inch space.
CONNECTIONS Unbalanced IHF lines-RCA type Phono Jacks
600 ohm Inputs-XLR type, three terminal female
600-ohm Outputs-XLR type, three terminal male.