ATI Audio DMM100 - Manual (Page 3)

Audio Technologies Inc. | 154 Cooper Road #902 | West Berlin, NJ 08091 | Voice 856-719-9900 | Fax 856-719-9903 | www. audio.com
POWER
The DMM100 operates from an external 24VDC power module and draws up to
.1A. Loop-thru DC connectors allow multiple DMM100 to operate from a single
power module. Allow one power module for every three one-rack spaces. Use
power modules WA100-1, -2 or -2E and loop-thru cables 20602-1.
The DMM100-BAT can operate from either four AA batteries in cover-mounted
holders or an external 24VDC power module. Fresh alkaline batteries will provide
a minimum of 40 hours operation. Toslink optical drivers can be disabled with an
internal jumper plug (JP1) to increase battery life by 50%. Batteries are cut off by
external power and can be used as an automatically switched backup power
source.
A front panel POWER switch and indicator are provided.
SIZE in (cm)
1.72(4.45) H X 5.75 (14.6) W X 6.0(15.2) D; 1.5lbs, .7Kg net
weight can be mounted up to three across in one vertical 1 ¾” rack
space using accessory rack mount kits. Stacking and angled desk
mount kits and field carry bags also available.
POWER SUPPLIES The DMM100 requires a 24VDC power supply, which
is ordered separately.
WA100-1 Wall mount power supply (UL, CSA), 24VDC at .4A output,
115VAC/60Hz, and 16VA input.
WA100-2 Tabletop supply, IEC320 AC connector, 24VDC at .4A output
230VAC/50Hz, 16VA input.
WA100-2E Euro plug wall mount supply (CE, VDE), 24VDC at .4A output
230VAC/50Hz, 16VA input.
20602-1
Loop-thru DC interconnect cable, 13” long.
RACK MOUNT KITS
20604-501 Center mount for single unit.
20604-502 Side-by-side mount for two units
20604-503 Side-by-side mount for three units