ATI Audio DDA208-BNC User Manual
Page 5
www.
audio.com
ATI Audio
n
Tel: 856-719-9900 n [email protected]
SPECIFICATIONS
INPUTS
Connectors:
2 XLR female or BNC, DC isolated from chassis.
Input connector pairs paralleled for loop-thru.
Level:
200mVp-p minimum
Impedance:
Transformer isolated, balanced and floating, XLR inputs 110
ohms, and BNC inputs 75 ohms
Termination:
Terminating resistors may be switched in or out from
Internal jumpers
Sample Rates:
Accepts 27kHz to >192kHz
Clock:
With re-clocking on, regenerated from input signal; clock
jitter <300 picoseconds peak-to-peak at 96kHz sample rate
With re-clocking off, input clock is passed directly to outputs
OUTPUTS
Connectors:
8 x XLR male or 8 x BNC chassis mount
Levels:
XLR, 4Vp-p loaded at 110 ohms
BNC, 2Vp-p loaded at 75 ohms
Impedances:
XLR: 110 ohms, balanced, transformer isolated
BNC: 75 ohms, unbalanced
Output Jitter:
<300 picoseconds peak to peak at 96kHz sample rate
Propagation Delay: <25 nanoseconds
POWER
Internal supply, 115/230VAC+/-10%, 50/60Hz, 10VA,
IEC320 3 pin connector
SIZE
1 RU, 19”(48.3cm) W X 1.75”(4.5cm) H X 8.5”(21.6cm) D
WEIGHT
7 lbs. (3.2kg) net; 9 lbs. (4.1kg) shipping weight
MODELS:
DDA208-XLR
DDA208-BNC