ATI Audio DA206 User Manual
Page 5
ATI Audio Inc. ■ Tel: 856-
719-9900 ■ Fax: 856-504-0220 ■ [email protected] ■ www.
audio.com
SPECIFICATIONS FOR DA206 AND DA412
OUTPUT LEVEL:
+22dBm peak into 600 ohm balanced load
+18dBm peak, typical, into unbalanced loads
DISTORTION:
THD .10% maximum, 20 to 20,000Hz at peak output
IMD .05% maximum, SMPTE measurement
SLEW RATE:
13 Volts per microsecond
RESPONSE:
± .25dB, 20 to 20,000Hz
NOISE:
-95dBm out at maximum gain, 20kHz bandwidth
GAIN:
40dB maximum
CROSSTALK:
70dB minimum at 10kHz, any path
OUTPUT ISOLATION:
70 dB minimum at 1kHz. A shorted output does not
affect any other output.
OUTPUTS:
Active balanced, servo controlled, ground sensing, 50
Ohm output impedance, DC coupled. XLR type male
connectors, Pin 2-HI, 3-LO, 1-GND.
INPUTS:
20Kohm active balanced, split and RF bypassed.
+22dBm maximum input level, 60dB CMR at 60Hz.
XLR type female connectors, Pin 2-HI, 3-LO, 1-GND.
POWER:
115/230 VAC ±10%, 47 - 63Hz, 20VA; use .5A,
250VAC fuse, UL listed, ¼ D x 1-1/4 inches long
SIZE:
19” (48.3cm) W X 1.75” (4.45cm) H X 7.5” (19cm) D
SHIPPING WEIGHT
DA206: 5 lbs. (2.3kg)
DA412: 6 lbs. (2.7kg)
MODELS AVAILABLE:
DA206 Dual 1X3 Active balanced outputs
DA412 Quad 1X3 Active balanced outputs