ATEIS PSS-G2-xx - Manual (Page 22)

PSSG2, CD-Touch series
Page 22 of 33
9. Working with the VACIE System
As stated previously, the key configurations and possibilities depend on the VACIE system connected
to the PSSG2, CD-TOUCH. However some operations are common to all system.
Note: all selection keys are highlighted in light blue when active.
9.1. Busy zone indication
When a system zone is occupied by an audio broadcasting, the corresponding PSSG2, CD-TOUCH
zone key is signalized as busy.
The busy indication is displayed in plain text within the key itself.
9.2. Starting a microphone call
In order to start a call in a zone or group of zone, follow the next steps.
Start a call without chime:
• Press on the zone(s) key
• Press the TALK key (Close fist microphone contact for CD-16)
• The TALK key will be red highlighted to indicate that the call is active.
o In Press To Talk Mode: press and keep your finger on the TALK key. (CD-Touch:
keep the contact closed)
o In Lock To Talk Mode: press once on the TALK key. (CD-Touch: apply one contact
closure)
• To stop the call:
o In Press To Talk Mode: release your finger from the TALK key. (CD-Touch: release
the contact)
o In Lock To Talk Mode: press once on the TALK key. (CD-Touch: apply one contact
closure)
Start a call with a pre-chime or post chime:
• Press on the zone(s) key