April Music Stello DA100 Signature - Manual (Page 7)

-6-
Note:
I²S interface cable should be as short in length as possible with its master clock, word
clock, bit clock, and audio data in individually shielded cable for the best perfor-
mance. DA100 Signature takes the I²S signals in TTL level.
OPT :
Standard Optical input, known industrially as "Toslink" , from Toshiba. Most DVD
players, cable / HDTV receivers, game machines, and PC or notebook sound cards are
equipped with either COAX or Toslink outputs for connection to an external DAC.
With some devices, you'll need to use the “SETUP” menu to set the output mode of
the device to export digital signal through this port.
The DA100 Signature accepts PCM signals only.
Setting "Digital Out" mode as "PCM"
� From the DVD player's setup menu, go to Audio Setup → Digital Out → PCM.
� Many DVD or universal players today support digital output with ‘96kHz.’ If your
player has this option, set its output to ‘96 kHz.’ This ensures the highest resolution
from the source, because the DA100 Signature accepts up to 24 Bit / 96 kHz. You will
be stunned with the reproduced sound!
USB : Any USB (Universal Serial Bus) output can be connected to this
port.
� DA100 Signature does not support ASIO driver.
1
2
4 5
3
PIN 1 : word clock
PIN 2 : bit clock
PIN 3 : audio data
PIN 4 : master clock
PIN 5 : not connected
Shield : circuit ground