April Music Eximus CD10 - Manual (Page 2)

EXIMUS CD10
CD PLAYER & D/A CONVER TER
Thank you for choosing the EXIMUS CD10 from April Music.
The EXIMUS CD10 is a truly innovative design embodying a brand new concept in CD player making that combines the CD transport
and D/A converter section in a single chassis. As a unique entry-level model, the CD10 stands out amongst a myriad of relatively
affordable CD players. Intended for 2-channel reproduction, the CDA200 will compete favorably against, and even surpass, the
performance of the latest available digital formats.
The EXIMUS CD10 is designed to operate at the following line voltages; 117, 230(220), 240 volts AC. This proper voltage is selected through internal
voltage selector switches.
The EXIMUS CD10 is a highly sensitive electronic apparatus. The best performance results will be achieved when used on a leveled, vibration free
shelf system, away from airborne vibration.
The 'Mains' switch is located on the rear panel. The 'Stand-by' switch can be operated manually on the front panel and through the red button of the
remote control. During a normal daily operation use only the 'Stand-by' switch leaving the 'Mains' switch in the 'on' position. The amount of current
draw in the stand by mode is very small while the internal circuitry is maintained at an optimal operating temperature. It is, however, recommended to
turn the 'Mains' switch off or unplug the AC power lead when you plan to leave the house for a prolonged period of time.
Do not open the chassis without prior authorization from the manufacturer or a certified EXIMUS agent. Unauthorized repair or tempering of any type
will void the manufacturer's warranty.
2 Safety screws are located on the bottom of CD10 for the safety during the transportation.
Make sure unscrew these safety lock before use. Please keep the screws safely for later use.
INTRODUCTION
CAUTION
Page1
FRONT
Do Not Touch!
Unscrew these two yellow bolts before use.