Aplex Technology ARCDIS-107 - Manual (Page 22)

ARCDIS-1XX User Manual 22
Chapter 3 Installation
3.1 Introduction to the PenMount 9036 Controller Board
The PenMount 9036 control board is configured for use with the RS-232 interface. It connects to the
touch screen, power supply and computer system ’s RS-232 port, and supports 4-, 5- and 8-wire touch
screens. The control board has some advanced functions, such as PnP and non-PnP mode adjustable
baud rate, thus making easy for customers to select different touch screens without changing the
control board. The size of the board is 25 by 60mm, and it has two connectors and one dipswitch
on-board.
3.2 Features
 RS-232 interface
 Touch controller is DMC9000
 Design for the best touch performance and easy configuration
 PnP or Non-PnP mode selectable
 Design for best cost arrangement
 Supporting 2048x2048 pen device resolution
 19200 or 9600 baud rate transmission selectable
 Upgraded noise handling mechanism (3 level scheme)
 Fixed and high-speed sampling rate
 4-, 5- and 8-wire touch screen supported
 Touch screen cable, RS-232 with power cable connectors onboard
 5V to 12V power input
 Circuit protection for input voltage
 Touch-activated LED indicator onboard
3.3 Electrical Specifications
Touch Screen:
4-, 5- and 8-wire analog resistive type
Touch Screen Controller:
DMC9000
Communications:
RS-232
Baud Rate:
19200 and 9600 baud rate selection