Aplex Technology ACS-2160 - Manual (Page 18)

ACS-2160 User Manual 18
Each USB Type A Receptacle (2 Ports) Current limited value is 1.5A.
If the external USB device current exceeds 1.5A, please separate connectors
into different Receptacle.
16. LAN1/LAN2:
LAN1/LAN2: (RJ45 Connector ), Rear LAN port, Two standard 10/100/1000M RJ-45
Ethernet ports are provided. Used Realtek RTL8111E chipset, LINK LED (green) and
ACTIVE LED (yellow) respectively located at the left-hand and right-hand side of the
Ethernet port indicate the activity and transmission state of LAN.
17. BUZ1:
Onboard buzzer.
18. LED1:
LED STATUS. Green LED for Motherboard Power status.
19. LED2:
LED STATUS. Green LED for Motherboard Standby Power Good status.
20. CN3
:
(1.27mm Pitch 2X30 Pin Header), For expand output connector, It provides four GPIO,
Two USB 2.0,one PS/2 mouse，one PS/2 keyboard,two uart,one PCIe x1,one SMbus.
Function Signal Name Pin# Pin# Signal Name Function
5V_S5_USB 1 2 5V_S5_USB
5V_S5_USB 3 4 5V_S5_USB