beautypg.com

Usb45, Lan1/lan2, Buz1 – Aplex Technology APC-3593P User Manual

Page 19: Led1, Led2

background image

APC-3x93P_R (SBC-7106) User Manual

19

(Diameter

3.5mm Jack), HD Audio port, An onboard Realtek ALC662 codec is used to

provide high quality audio I/O ports. Line Out can be connected to a headphone or

amplifier.

15. USB45:

USB4/USB5:(Double stack USB type A), Rear USB connector, it provides up to 4

USB2.0 ports, High-speed USB 2.0 allows data transfers up to480 Mb/s ,support USB

full-speed and low-speed signaling.

Each USB Type A Receptacle (2 Ports) Current limited value is 1.5A.

If the external USB device current exceeds 1.5A, please separate connectors

into different Receptacle.

16. LAN1/LAN2:

LAN1/LAN2: (RJ45

Connector

),

Rear LAN port, Two standard 10/100/1000M RJ-45

Ethernet ports are provided. Used Realtek RTL8111E chipset, LINK LED (green) and

ACTIVE LED (yellow) respectively located at the left-hand and right-hand side of the

Ethernet port indicate the activity and transmission state of LAN.

17. BUZ1:

Onboard buzzer.

18. LED1:

LED STATUS. Green LED for Motherboard Power status.

19. LED2:

LED STATUS. Green LED for Motherboard Standby Power Good status.

This manual is related to the following products: