API Audio THE BOX - Manual (Page 36)

API “The BOX” Operator’s Manual
36
The summing input MUTE and SOLO switches are located just above the fader.
NOTE: The SAFE switch is located below the pan-pot.
Refer to section 9.0 Solo Master for more information regarding the solo system.
MUTE: Cuts the channel output
•
Located post-fader in the signal flow
•
Illuminates in red when engaged
•
Activates on release
SOLO: Activates the current solo function on that channel
•
PFL, AFL, or solo-in-place (PFL is default)
•
Can be cleared by pressing the SOLO CLEAR switch
•
Illuminates in orange when engaged
SAFE (solo safe): Activates the solo-safe function on that channel
•
SAFE prevents muting when Solo-In-Place is active and another
channel is soloed.
•
Illuminates when engaged
SUMMING FADER: Primary output level control
•
100mm full-size audio-taper fader
•
-∞dB to +12dB range
•
0dB is unity gain
•
White fader cap