Apantac MT HOOD Series HDMI Extenders - Manual (Page 13)

Apantac – MT HOOD - HDMI Extenders USER GUIDE Page 12 of 18
Cascading connection for two HDMI Extender/Receivers
1. Power off all devices
2. Connect HDMI source device to HDMI-1-SERM using
HDMI cable
3. Connect HDMI-1-R or HDMI-SR to HDMI display using
HDMI cable
4. Repeat Step 3 and 4 for the next HDMI display until all
of them are connected
5. If a local display is required, connect HDMI display to
the HDMI monitor output port
6. Connect HDMI-SR to the secondary HDMI-SERM
7. Power on all devices
8. Adjust equalizer control knob to fine tune the picture
quality