Amina ALF120 - Manual (Page 5)

5
Outlet port
The bass sound from the ALF120 exits
through the outlet port slot at the base
of the front of the cabinet. The outlet
port is placed in this position to allow
discreet in-wall installation. The slot in
the wall that aligns with the outlet port is
positioned low down, close to the floor.
In-room installations are also possible
where the ALF120 can be concealed
under, behind or within furniture. In cases
where the ALF120 may be installed laid
flat, the position of the outlet port may
be moved from the supplied position
at the base of the tall, front face of the
cabinet (shown on the right) to the end
face of the cabinet.
Re-positioning the outlet port
Lay the ALF120 on its back face. •
Undo the ten screws (arrowed) •
securing the outlet port.
Rotate the outlet port to position it at
•
the end of the cabinet.
Re-fit the screws.
•
Outlet port