AMETEK HPDC-450V - Manual (Page 3)

Technical Note
ReFlex Power™ Mating Connectors for HPDC-450V Module
Document No. W380271-02 Rev E • 1/23/2009
©2008 AMETEK Programmable Power, Inc. • All rights reserved. • AMETEK is a trademark of AMETEK, Inc.
9250 Brown Deer Road, San Diego CA 92121 • Tel: 858-450-0085 • Fax: 858-458-0267 • email: [email protected] • Web: www.programmablepower.com
3 of 3
DC OUTPUT CONNECTOR
Connector: Positronic Industries P/N CBC21WA4M1000Z, AMETEK P/N 856-214-04
Crimp contacts: Positronic Industries P/N MC6020D
Pins A1-A4: Positronic Industries P/N MS4820D-50, AMETEK P/N 856-745-53
Backshell: Positronic Industries P/N D37000Z00, AMETEK P/N 856-247-39
Wire size: Maximum gauge 20 AWG (recommended)
Refer to table for recommended wire gauge/length.
DC OUTPUT PINOUT
Figure 3. DC Output Connector, Front Panel View
Pin Name Function Signal Level
Maximum Wire
Gauge, AWG
Maximum Wire
Length, ft
A1 OUT
Output: module output source;
connected to A3 ±450V; ±450V, maximum
to chassis
20
45, for 1.5V line drop
at 15A
A2 OUT-RTN
Output: return for output source, OUT;
connected to A4 ±450V; ±450V, maximum
to chassis
20
45, for 1.5V line drop
at 15A
A3 SNS
Input: remote sense connection for
OUT ±450V; ±450V, maximum
to chassis
20 45
A4 SNS-RTN
Input: remote sense connection for
OUT-RTN ±450V; ±450V, maximum
to chassis
20 45
9 CHAS-GND Shield ground Chassis ground 20 45
1-8,
10-17
- Reserved - - -
DC OUTPUT CONNECTOR ACCESSORIES
• AMETEK P/N 5380447-01, HPDC 450V Module, 9ft. Unterminated DC Output Cable Assembly.
• AMETEK P/N 5380447-03, HPDC 450V Module, right angle, 9ft. Unterminated DC Output Cable Assembly.