Dreamer Design Ditto RPS - Manual (Page 3)

foam protector
push button
Make sure the foot brake is in the
unlocked, up, position.
To put the rear wheels on, push the button on
the wheel while pushing the wheel axle into
the stroller frame.
Remove and discard the foam protectors on
the wheel axles.
be sure to discard the plastic bags from the wheels -
they are a suffocation hazard for children
check to make sure the wheels are
secure before each use
a s s e m b l y
Unfold the frame and insert the thumb
tabs into the slots.
Fold the plastic swing clasps in, to latch
around the frame.
Tip the stroller back so it is resting on its
handle and rear wheels to put the front
wheel on.
Make sure the brake release lever is
pointed out, away from the stroller.
lever pointed out
thumb tabs
swing clasp